Marine Fuel filter Water Separator s3227 Complete kit

Marine Fuel filter Water Separator s3227 Complete kit

 

 

Product information:

• Outer diameter 1 : 97mm
• Inner Diameter 2 : 80mm
• Height : 111mm
• Inner Diameter 1 : 90mm
• Thread Size 1 : S 80 X 2.5
• Thread Size : 1-14 UNF
• Filter type : Screw-on Filte
• Country/Region of Manufacture: China

Product Description
1. Loosen the self-venting drain plug to drain water from the bowl into a container.
2. Tighten the drain.
3. Use a primer bulb to fill the filter with fuel.
4. Start the engine and check to ensure there are no leaks.
Model: YANMAR : 206505-5020, VOLVO : 857633, ‎HONDA 17670-ZW1-801AH, MERCURY MARINE 35-886638, RACOR S3227, SUZUKI 99105-20005

To Replace
1. Loosen the self-venting drain plug and drain the into a container.
2. Remove the filter from the mounting bracket with the bowl connected.
3. Remove the bowl from the filter sand and clean the o-ring gland on the bowl. BOWL IS REUSABLE * DO NOT DISCARD IT.
4. Lubricate the o-ring with oil or grease and install on a bowl.
5. Install bowl onto new, tighten by hand.
6. Lubricate the filter top seal with oil or grease.
7. Fill the filter/bowl assemble with clean fuel and attach it to the mounting bracket, tighten it by hand.
8. Start the engine and check to ensure there are no leaks.

Replaces Mercury, Mercruiser, Quicksilver, Yamaha, Suzuki, SMI, Volvo Penta, Sierra, AquaPower, Honda, Tohatsu

 

CONTACT US